Made In Great Britain

Direct from our factory

Free Next Day Delivery

On orders over £750

Product Test Results

All test results published

Expert Technical Advice

Call or chat with our team

A 5kg bucket of Everflor Enduracoat Original floor coating, featuring a black and silver container with a label showing a light grey coated floor and product features.
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau (RAL 7012)
  • Grau (RAL 7004)
  • Hellgrau (RAL 7047)
  • Weiß
Extreme Wear
Extreme Wear

100% Solids Technology

High Film Build

220 Microns Per Coat

Interior Use

Internal Floors Only

Brush & Roller

Easy Application

A 5kg bucket of Everflor Enduracoat Original floor coating, featuring a black and silver container with a label showing a light grey coated floor and product features.
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau (RAL 7012)
  • Grau (RAL 7004)
  • Hellgrau (RAL 7047)
  • Weiß
Two-Pack Epoxy

Industrial grade coating

100% Solids

Solvent free, no shrinkage

High Build Formula

Up to 5x thicker

Extreme Durability

Withstands heavy forklift traffic

Chemical Resistant

Resists oil, acids, alkalis

Gloss Finish

Easy-clean surface

Ausverkauft
A 5kg bucket of Everflor EnduraCoat Fast Cure floor coating system, shown on a clean white background. The product packaging is a black and silver plastic bucket with a detailed label featuring the brand name, product name, and application icons.
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau (RAL 7012)
  • Grau (RAL 7004)
  • Hellgrau (RAL 7047)
  • Weiß
Two-Pack Epoxy

Industrial grade coating

100% Solids

Solvent free, no shrinkage

High Build Formula

Up to 5x thicker

Extreme Durability

Withstands heavy forklift traffic

Chemical Resistant

Resists oil, acids, alkalis

Gloss Finish

Easy-clean surface

Ausverkauft
A 5kg bucket of Everflor EnduraCoat Fast Cure floor coating system, shown on a clean white background. The product packaging is a black and silver plastic bucket with a detailed label featuring the brand name, product name, and application icons.
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau (RAL 7012)
  • Grau (RAL 7004)
  • Hellgrau (RAL 7047)
  • Weiß
Two-Pack Epoxy

Industrial grade coating

100% Solids

Solvent free, no shrinkage

High Build Formula

Up to 5x thicker

Extreme Durability

Withstands heavy forklift traffic

Chemical Resistant

Resists oil, acids, alkalis

Gloss Finish

Easy-clean surface

Square concrete block with layered structure on a dark background

Forklift or Heavy Traffic?

Step Up to a 2K Resin Floor System

Medium duty acrylic systems are not designed for sustained forklift traffic or chemical exposure. Upgrade to EnduraCoat, a heavy duty epoxy coating with greater abrasion and chemical resistance.

View EnduraCoat
Ausverkauft
A 5kg bucket of Everflor EnduraCoat Cold Cure floor coating system, featuring a black and silver label with blue accents and a grey color swatch indicating the light grey color of the coating.
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau (RAL 7012)
  • Grau (RAL 7004)
  • Hellgrau (RAL 7047)
  • Weiß
Two-Pack Epoxy

Industrial grade coating

100% Solids

Solvent free, no shrinkage

High Build Formula

Up to 5x thicker

Extreme Durability

Withstands heavy forklift traffic

Chemical Resistant

Resists oil, acids, alkalis

Gloss Finish

Easy-clean surface

Ausverkauft
A 5kg bucket of Everflor EnduraCoat Cold Cure floor coating system, featuring a black and silver label with blue accents and a grey color swatch indicating the light grey color of the coating.
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau (RAL 7012)
  • Grau (RAL 7004)
  • Hellgrau (RAL 7047)
  • Weiß
Two-Pack Epoxy

Industrial grade coating

100% Solids

Solvent free, no shrinkage

High Build Formula

Up to 5x thicker

Extreme Durability

Withstands heavy forklift traffic

Chemical Resistant

Resists oil, acids, alkalis

Gloss Finish

Easy-clean surface

4.9
A 20L can of Everflor Polyflor Industrial floor paint in 'Mid Grey', featuring a black and silver label with blue accents and an industrial floor application photo.
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau
  • Grau
  • Hellgrau
  • Weiß
4.9
A 20L can of Everflor Polyflor Industrial floor paint in 'Mid Grey', featuring a black and silver label with blue accents and an industrial floor application photo.
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau
  • Grau
  • Hellgrau
  • Weiß
4.9
Everest Trade – Schnell trocknende ultimative Bodenfarbe – hohe Deckkraft – rutschfest
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau
  • Grau
  • Hellgrau
  • Gelb
Everest Trade – Schnell trocknende ultimative Bodenfarbe – hohe Deckkraft – rutschfest
Anbieter:EverFlor
  • Schwarz
  • Dunkelgrau
  • Grau
  • Hellgrau
  • Gelb
Ausverkauft
A 5kg bucket of Everflor TractionCoat Original floor coating, featuring a black and silver label with a grey color swatch indicating the paint color.
Anti-Slip

Added Traction Grip

100% Solids

Solvent free, no shrinkage

High Film Build

220 Microns Per Coat

Internal & External

Indoor & Outdoor Use

Overnight Cure

Full Cure in 16 Hours

Ausverkauft
A 5kg bucket of Everflor TractionCoat Fast Cure system pack floor coating, shown on a clean white background. The bucket is black and silver with a label depicting a concrete warehouse ramp and detailing the product's features.
Ausverkauft
A 5kg bucket of Everflor TractionCoat Cold Cure floor coating in 'Mid Grey', featuring a black and silver label with product details and a grey color swatch.
Ausverkauft
A 5kg bucket of Everflor ToughGrip Extreme-Duty Anti-Slip floor coating, shown on a clean white background. The bucket is black with a silver metal rim and handle, and the label features black, white, and orange text.
Anbieter:EverFlor
Ausverkauft
A 5L bucket of Everflor Traffic Mark 1K Flexible Acrylic Line Marking Paint in Colour: Safety Yellow, shown on a clean white background.
Anbieter:EverFlor
Ausverkauft
A 5kg bucket of Everflor Clearguard Ultra 2K Polyasphartic Clear Topcoat floor coating, featuring a black and silver label with teal accents and a photo of a polished showroom floor.
Anbieter:EverFlor
Ausverkauft
A 5kg bucket of Everflor Clearguard Original 2K Clear Epoxy Protective Topcoat floor coating, featuring a black and silver label with white text and blue accents.
Dust Proofer

Seals Concrete Dust

Chemical Resistant

Resists oil, acids, alkalis

Easy Clean

Wipe Down Surface

Interior Use

Internal Floors Only

5.0
Everest Trade – Tief eindringende Epoxidgrundierung/Versiegelung – Zweikomponenten-Epoxidbeschichtung
Penetrating Primer

Seals Porous Floors Before Coating

100% Solids

Solvent free, no shrinkage

48 Hour Overcoat

Topcoat Within 48 Hours

Internal & External

Indoor & Outdoor Use

Foot Traffic Ready

Walk On After 8 Hours

No Thinning Needed

Apply Straight From The Tin

Ausverkauft
A 5kg bucket of Everflor Prime DT damp tolerant epoxy primer, featuring a black and silver container with a detailed product label on a white background.
Damp Tolerant
Damp Tolerant

Apply to Damp Surfaces

Penetrating Primer
Penetrating Primer

Seals Porous Floors Before Coating

100% Solids
100% Solids

Solvent free, no shrinkage

Internal & External
Internal & External

Indoor & Outdoor Use

Coating Preparation
Coating Preparation

Cleans Floors Before Priming

Sparen Sie 3%Ausverkauft
EverFlor - Prime OT
Anbieter:EverFlor

EverFlor - Prime OT

Verkaufspreis€183,95Normaler Preis €189,95
Oil Tolerant
Oil Tolerant

Binds to Stained Concrete

Penetrating Primer
Penetrating Primer

Seals Porous Floors Before Coating

100% Solids
100% Solids

Solvent free, no shrinkage

48 Hour Overcoat
48 Hour Overcoat

Topcoat Within 48 Hours

Prepared Concrete Only
Prepared Concrete Only

Degrease And Grind Before Priming

Ausverkauft
EverFlor - Prime 4H - Rapid Cure Epoxy Floor Primer
Fast Cure
Fast Cure

Walk on in 4 Hours

Penetrating Primer
Penetrating Primer

Seals Porous Floors Before Coating

100% Solids
100% Solids

Solvent free, no shrinkage

48 Hour Overcoat
48 Hour Overcoat

Topcoat Within 48 Hours

Same Day Recoat
Same Day Recoat

Recoat After 4 Hours at 20°C

4.9
A 5L metal can of Everflor Prime PU PU Primer & Sealer, a professional floor coating system. The canister is black with a red cap, featuring white and blue text and graphics detailing its deep penetration and concrete sealing properties.
Penetrating Primer

Seals Porous Floors Before Coating

48 Hour Overcoat

Topcoat Within 48 Hours

User Friendly

Simple 1-Pack System

Foot Traffic Ready

Walk On After 8 Hours

Masonry Substrates

Concrete, Screed, Brick & Plaster

Ausverkauft
A 5L can of Everflor Polyseal 1K PU Floor Sealer, featuring a black label with white and red text and a red cap, set against a plain white background.
EverFlor - Etch and Clean
Acid Etch

Opens Concrete Pores

Removes Laitance

Strips The Weak Surface Layer

Adhesion Prep

Keys Floors Before Priming

No Grinding Needed

Prep Where Machines Cannot Go

Neutralises Alkalinity

Balances New Concrete Slabs

Bare Concrete Only

Strip Existing Coatings First

EverFlor - Degreaser
Anbieter:EverFlor

EverFlor - Degreaser

Ab €57,95
Adhesion Prep

Keys Floors Before Priming

Internal & External

Indoor & Outdoor Use

User Friendly

Simple 1-Pack System

Trade Standard

Professional Formula

Oil & Grease Removal

Lifts Contamination From Floors

Dilutable Concentrate

Up To 40m² Per Litre

Ausverkauft
EverFlor - Ultra-Grip - Heavy-Duty Anti-Slip Additive
Anti-Slip
Anti-Slip

Added Traction Grip

Forklift Ready
Forklift Ready

Industrial Grade Strength

User Friendly
User Friendly

Simple 1-Pack System

Long Shelf Life
Long Shelf Life

24 Months Sealed

Mohs 9.5 Hardness
Mohs 9.5 Hardness

Silicon Carbide Resists Wear

Broadcast Or Mix
Broadcast Or Mix

Scatter Over Or Stir In

Ausverkauft
A 700g bucket of Everflor HD Safety Grip fine grade anti-slip additive, featuring a black and white label with yellow accents, on a white background.
Anti-Slip

Added Traction Grip

Fine Texture
Fine Texture

Subtle Grip Underfoot

Easy Dispersion
Easy Dispersion

Mixes In At Low Speed

Internal & External

Indoor & Outdoor Use

Mohs 9 Hardness
Mohs 9 Hardness

Aluminium Oxide Resists Wear

Coloured Coatings Only
Coloured Coatings Only

Not For Clear Sealers

Ausverkauft
A 375g bucket of Everflor HD Safety Grip Coarse Grade Anti-Slip Additive, featuring a black and white label with green accents, on a white background.
Mohs 9 Hardness
Mohs 9 Hardness

Aluminium Oxide Resists Wear

Broadcast Or Mix
Broadcast Or Mix

Scatter Over Or Stir In

Coloured Coatings Only
Coloured Coatings Only

Not For Clear Sealers

Internal & External

Indoor & Outdoor Use

Coarse Texture
Coarse Texture

Aggressive Grip Underfoot

Warehouse and Factory Floor Coating Systems for Concrete Floors

Duty classification:
Light to Heavy Duty
Suitable substrates:
Concrete Asphalt Previously Painted Floors

System Overview

For concrete floors in warehouses and factories, coating systems are typically specified to improve durability, simplify cleaning, and protect the underlying substrate from mechanical wear, contamination, and operational traffic. These environments commonly involve forklift movement, pallet handling, rolling loads, and routine wash-down, all of which can quickly degrade unprotected concrete.

Within the EVEREST Everflor range, warehouse and factory floor coatings include epoxy, polyurethane, polyaspartic, and acrylic technologies covering a broad duty spectrum from light maintenance coatings through to heavier industrial systems. The purpose of this collection is to provide a technical gateway for facilities managers, contractors, and maintenance teams specifying resin-based floor paint systems for operational buildings where performance requirements vary widely across different zones.

Light-use areas such as storage aisles, pedestrian walkways, and service corridors may only require thin-film coatings primarily focused on dust suppression and visual improvement. By contrast, loading areas, vehicle routes, and production floors frequently demand higher abrasion resistance and improved chemical tolerance. The choice of resin technology therefore depends on traffic intensity, cleaning regime, operational downtime constraints, and substrate condition.

Suitable Substrates & Surface Preparation

Concrete remains the most common substrate in warehouses and manufacturing buildings, but surface condition varies significantly between new construction, older floors, and previously coated areas. Successful coating performance depends heavily on removing laitance, contamination, and weak surface layers that prevent proper adhesion.

On bare concrete, preparation may involve mechanical grinding, shot blasting, or similar methods to establish a stable and suitably profiled surface. Oil contamination, tyre residues, and production by-products must be removed before coating installation. Moisture conditions should also be assessed, particularly where epoxy systems are being considered, as elevated substrate moisture can affect cure development and long-term adhesion.

Previously painted floors require additional evaluation. Existing coatings must be sound, well adhered, and compatible with the proposed system. Any flaking, poorly bonded, or chemically degraded coatings should be removed back to a stable surface before recoating. In some cases, intermediate primers or sealers may be used to improve intercoat adhesion and regulate substrate porosity.

Asphalt floors, while less common internally, may appear in loading areas or external warehouse aprons. Bituminous surfaces can soften under heat and vehicle stress, which must be considered when selecting rigid resin technologies.

Performance Characteristics & Limitations

Epoxy floor coatings are widely used in warehouse and factory environments due to their strong adhesion to prepared concrete and their ability to provide durable, chemically resistant films capable of withstanding vehicle traffic and mechanical wear. These systems can form the backbone of many medium to heavy-duty floor specifications.

Polyurethane coatings often function as wear-resistant topcoats where additional abrasion resistance, flexibility, or colour stability is required. They can also help improve long-term appearance in areas exposed to natural light.

Polyaspartic technologies are typically selected where rapid curing is important. Facilities with limited shutdown windows may benefit from systems that allow faster return to service, although the faster reaction time increases the importance of controlled mixing and application procedures.

Acrylic coatings are generally positioned as lighter-duty solutions suitable for maintenance repainting or lower traffic environments. While easier to apply and often faster drying, they provide less mechanical and chemical resistance than two pack resin technologies.

All systems rely heavily on correct preparation, accurate mixing for two pack materials, and suitable environmental conditions during installation. Inadequate substrate preparation or uncontrolled curing environments can lead to premature coating failure regardless of resin type.

Internal vs External Considerations

Internally, warehouse and factory floors are primarily exposed to abrasion, mechanical traffic, oil contamination, and cleaning chemicals rather than weathering. Forklift turning points, pallet drop zones, and loading areas tend to experience the highest wear, often requiring heavier-duty resin systems or thicker film builds.

Externally, floor coatings may be exposed to rainfall, standing water, UV exposure, and wider temperature variation. Asphalt service yards and external loading bays can experience significant thermal movement, which may influence the suitability of rigid resin coatings. Systems used externally must also consider drainage, slip risk, and contamination from vehicle fluids.

Operational planning is another major factor. Some industrial facilities cannot close large sections of floor area for extended periods, making faster curing technologies or phased installation strategies important during specification.

Selection Guidance & When to Specify Alternatives

This gateway collection provides a starting point for specifying warehouse and factory floor paint systems where prepared concrete floors require protection against operational wear. It covers coatings suitable for light-use storage spaces through to heavier duty areas subject to vehicle traffic and regular industrial activity.

Where the floor is exposed to constant forklift movement, severe abrasion, aggressive chemicals, or heavy pallet impact, a heavier build epoxy system may be more appropriate than standard floor paint coatings. Similarly, facilities requiring extremely rapid return-to-service may benefit from dedicated fast-cure polyaspartic floor systems designed for accelerated installation schedules.

Correct system selection should therefore consider traffic intensity, chemical exposure, maintenance cycles, downtime constraints, and the condition of the underlying concrete substrate before choosing the most appropriate coating technology.

Compare Epoxy Floor Systems

Warehouses & Factory Paints FAQs

View All FAQ's

Technical Guidance & Application Advice

Warehouse and factory environments often require coating systems capable of withstanding varying traffic levels, mechanical wear, and occasional chemical exposure. Correct substrate preparation and appropriate system selection are essential to ensure reliable adhesion and coating durability. Resin chemistry, curing speed, and expected operational conditions should always be considered when selecting between acrylic, epoxy, polyurethane, or polyaspartic floor coating technologies.

What preparation is required before applying warehouse or factory floor paint to concrete?

Concrete substrates should be clean, structurally sound, and mechanically prepared to promote adhesion. Surface laitance, curing compounds, grease, oil, and dust must be removed prior to coating. Mechanical methods such as diamond grinding or shot blasting are typically preferred for industrial floors as they create a suitable surface profile for resin systems. Moisture levels should also be assessed, particularly for ground-bearing slabs. Inadequate preparation can lead to poor adhesion, premature wear, or coating delamination under forklift or pallet truck traffic.

Can warehouse floor coatings be applied over previously painted floors?

Previously coated floors can often be recoated provided the existing coating remains well bonded to the substrate. Loose, flaking, or poorly adhered material must be completely removed before application. The existing surface should be cleaned and lightly abraded to create a mechanical key for the new coating system. Compatibility between the existing coating and the new resin system should also be considered. Where the existing coating type is unknown or shows signs of deterioration, full removal and substrate preparation is generally the safer approach.

Which coating technology is most suitable for heavy traffic warehouse floors?

Epoxy and polyurethane systems are commonly used for areas subject to regular forklift movement, pallet handling, and mechanical abrasion. These resin technologies typically provide higher film strength and improved wear resistance compared with lighter duty acrylic coatings. Polyaspartic systems may also be specified where rapid curing and reduced downtime are required. The final system selection should consider traffic intensity, chemical exposure, and substrate condition. In some cases, higher-build or multi-coat systems may be recommended for long-term performance.

Are acrylic floor paints suitable for warehouse and factory environments?

Acrylic coatings are typically used in lighter duty environments where traffic levels are moderate and rapid application is required. They are often selected for maintenance coatings, pedestrian areas, or low-intensity operational zones. While they provide a practical and economical protective layer, acrylic systems generally offer lower abrasion and chemical resistance compared with epoxy or polyurethane coatings. For areas exposed to frequent forklift traffic, heavy loads, or industrial chemicals, a two pack resin system will normally provide more suitable long-term performance.

How do polyaspartic floor coatings benefit busy warehouse or production areas?

Polyaspartic coatings are often used where operational downtime must be kept to a minimum. These systems cure significantly faster than conventional epoxy coatings and can often return to service within a shorter timeframe, depending on site conditions. They can also tolerate lower application temperatures compared with some traditional resin systems. However, correct surface preparation and careful application remain essential. Fast curing also means working time is limited, so application planning and material handling must be managed carefully on larger areas.

What factors affect the durability of factory floor coatings under vehicle traffic?

Durability is influenced by several factors including substrate preparation, coating thickness, resin chemistry, and curing conditions. Forklift turning movements, steel-wheeled equipment, and constant pallet movement can significantly increase abrasion stress on the coating film. Insufficient film build or poor adhesion can lead to premature wear in these high-pressure zones. Chemical exposure, oil contamination, and cleaning regimes can also affect coating longevity. Selecting an appropriate system for the duty level and preparing the surface correctly are essential for reliable long-term performance.

Didn’t find your answer?

Don't hestitate to contact us

Expert Advice & Guides

A few of our most recent guides applicable to this product range.

View Technical Hub

Dieser Abschnitt enthält derzeit keine Inhalte. Füge über die Seitenleiste Inhalte zu diesem Abschnitt hinzu.